Tips to Maintain Drywall

Today, from wherever you pass, a building, an office, or a home, you will not miss crossing through a drywall. This is because, drywalls are cost-effective and offer numerable benefits, therefore makes up for the popular choice.    

People prefer installing this over plaster because these are fire and water resistant and also lasts longer. But, here’s a trick. These drywalls won’t stay as it is, if left unattended. These drywalls once installed would require yours as well as the attention of the drywall contractors time and again to make them last longer.   

Here are some of the tips and tricks that you must look in to keep the drywalls intact.   

Dusting  

Generally, too, dusting the wall will not do any wrong to the wall. In order to take care of the wall, do this regularly to prevent dust from settling on the wall. You can dust it either by using a feather duster or a dry cloth. Dusting the wall daily will keep the dirt away and give your drywall an appealing look. This practice will ensure that the wall stays in a good condition. If your drywall is not painted or protected, then dusting will prove to be beneficial. But if your drywall is shielded, then you can opt to wash it, but carefully.  

Washing  

This is also a crucial step to keep the drywalls protected but it needs to be done with caution because the drywalls are vulnerable to water damage and you must know how much water will harm or clean your drywall. Washing the drywall with cellulose sponge is the best option. These sponges are good at soaking only the small amount of liquid, therefore these will not harm your drywall. Here’s a warning! As also mentioned earlier, the drywalls are at a risk of getting damaged even with droplets of water. So, you must be very careful in keeping them protected.   

Fill holes and indentations 

Fill Holes and Indentations

Normal walls or even the drywalls get holes and that’s completely fine. If your drywall gets hole, that does not mean you will replace the whole wall just to cover up the hole with the paint or any other decorative item. Even if you do this, it would only stay temporarily and may even make the matter worse, forcing you to replace the entire drywall later on. But, hello, only to protect your drywall from further damage and save you dollars, filling holes would work wonders.  

If your drywall has got a small hole, you can cover it up with the patching compound and if it is a large hole, it is advisable to use a joint compound. These compounds in powered form have a wide-ranging setup time. For medium sized holes, it is great to use stick-on mesh patch to cover up the hole. Before you use these, you should make sure that the wall is clean before hiding the hole. To fill up the indentations, all you would require is covering the drywall with two or three layers of the joint compound that is used by the builders for taping.  

Cover the exposed paper 

Cover the Exposed Paper

The drywall paper may get exposed when you take off any decorative item. In this case, only the first layer of the drywall will be removed, leaving the rest of the layers intact. However, the brown paper that is left exposed after that does not look good at all. Before you patch it up, remember to seal that patch up first and then move ahead with the next step.  

Sealing the spot is important because if you will directly patch up the wall, the water in the patching material will react with the drywall paper causing the formation of a bubble, which will cause more issues in the near future. In order to seal it first, you should first use either a shellac-based sealer or oil. After you are done applying the sealer, wait for it to dry up and then sand and patch it up. After following all these steps, you will be left with nothing but with an ordinary wall repair job.  

Cracks  

Cracks

With time, your drywalls may get cracks and a little one would also prove to be fatal for you, forcing you to replace the entire drywall. But, just to protect you from getting into any such hustle, here is what you can do to prevent cracks. Whether the crack is vertical or horizontal, first widen the crack carefully and check if the crack extends further or not and if the tape has been pulled from the surface or not. If the tape remains unaffected, it means the crack was formed by the old compound in the drywall. Then all that you need to do is fill up the crack with the new compound. Allow the joint compound to dry up quickly, wipe away the dust, and then dust the paint over it.  

Maintaining a drywall is simple, only if you clean it and take care of it on a regular basis.  A basic level of daily maintenance will do the job. But since such acts are better handled by the experts, it is always advisable to reach out to the best ceiling contractors. So, do not wait for your drywall to turn into a disaster instead contact the best drywall contractors in Vancouver.   

 

Leave us a Comment